1. 2. 3. material content data sheet sales product name IPD35N10S3L-26 issued 21. september 2015 ma# ma001383972 package pg-to252-3-11 weight* 371.35 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 3.025 0.81 0.81 8147 8147 leadframe non noble metal iron 7439-89-6 0.215 0.06 580 inorganic material phosphorus 7723-14-0 0.065 0.02 174 non noble metal copper 7440-50-8 215.017 57.90 57.98 579015 579769 wire non noble metal aluminium 7429-90-5 1.864 0.50 0.50 5021 5021 encapsulation organic material carbon black 1333-86-4 1.250 0.34 3365 plastics epoxy resin - 21.870 5.89 58894 inorganic material silicondioxide 60676-86-0 101.853 27.43 33.66 274277 336536 leadfinish non noble metal tin 7440-31-5 3.787 1.02 1.02 10197 10197 plating non noble metal nickel 7440-02-0 0.091 0.02 244 inorganic material phosphorus 7723-14-0 0.000 0.00 0.02 1 245 solder noble metal silver 7440-22-4 0.078 0.02 209 non noble metal tin 7440-31-5 0.062 0.02 167 non noble metal lead 7439-92-1 2.970 0.80 0.84 7998 8374 heatspreader non noble metal iron 7439-89-6 0.019 0.01 52 inorganic material phosphorus 7723-14-0 0.006 0.00 16 non noble metal copper 7440-50-8 19.177 5.16 5.17 51643 51711 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
